In a few words
With more than 40% of oil phase emulsified with Emulium® Dermolea MB, this rich cream will definitely
soothe dry skin areas. Its soft rich texture includes two active ingredients sourced in the heart of France:
Gatuline® RC Bio and Gatuline® Skin-Repair AF. Lipocire™ A SG at 10% brings a melting sensation thanks to its melting point close to body temperature.
Key points
- Comfort
- >40% Oil phase
- Non sticky rich texture
Upon application
Formule
| Phase | Name | INCI | Supplier | % |
|---|---|---|---|---|
| A1 | DEMINERALIZED WATER | WATER | - | 37.72 |
| GLYCERIN | GLYCERIN | - | 5.00 | |
| A2 | AVICEL® PC 591 | MICROCRYSTALLINE CELLULOSE, CELLULOSE GUM | Dupont | 5.00 |
| A3 | EUMULGIN® SG | SODIUM STEAROYL GLUTAMATE | BASF | 0.40 |
| B | EMULIUM® DERMOLEA MB | POLYGLYCERYL-6 DISTEARATE, CANDELILLA/JOJOBA/RICE BRAN POLYGLYCERYL-3 ESTERS | Gattefossé | 4.00 |
| LIPOCIRE™ A SG | C10-18 TRIGLYCERIDES | Gattefossé | 10.00 | |
| SHEA BUTTER | BUTYROSPERMUM PARKII BUTTER | - | 5.00 | |
| TOCOPHEROL | TOCOPHEROL | - | 0.10 | |
| SCHERCEMOL™ DIS ESTER | DIISOPROPYL SEBACATE | Lubrizol | 20.00 | |
| PRESERVATIVE | PRESERVATIVE | - | 1.00 | |
| LEXFEEL™ N350 | CAPRYLOYL GLYCERIN/SEBACIC ACID COPOLYMER, DIHEPTYL SUCCINATE | Inolex | 7.00 | |
| C | GATULINE® SKIN REPAIR AF | PROPANEDIOL, ONOPORDUM ACANTHIUM FLOWER/LEAF/STEM EXTRACT, WATER | Gattefossé | 2.00 |
| GATULINE® RC BIO | WATER, FAGUS SYLVATICA BUD EXTRACT | Gattefossé | 2.00 | |
| UNICERT BLUE 05601-J (0.1% SOL.) | AQUA, CI 42090 | Sensient | 0.15 | |
| UNICERT RED K7057-J (0.5% SOL.) | AQUA, RED 33 | Sensient | 0.14 | |
| D | CITRIC ACID (10% SOL.) | AQUA, CITRIC ACID | - | 0.19 |
| E | PERFUME ARGAN ORANGER MIEL RS35850 | PARFUM | TECHNICO-FLOR | 0.30 |
| 100,0 |
Operating instruction
- Prepare phase A1 into the main vessel and heat at 65-70°C.
- Add phase A2 and disperse Avicel® PC 591 with rotor stator (3000rpm) until homogeneous.
- Add phase A3 and disperse Eumulgin® SG with rotor stator (3000rpm) until homogeneous. Then heat at 70-72°C
- In the melter, prepare phase B and heat at 70-72°C.
- Proceed with the emulsion at 70-72°C: under rapid mixing (rotor stator 3000rpm) and add slowly phase B into Phase A1+A2+A3.
- Homogenize for 10 minutes with rotor stator at 3000rpm.
- Cool under normal stirring and at about 25°C, add Phase C, D, and E.
Specifications
- Aspect:
Light lilac color cream - pH = 6.5 ± 0.5
- Viscosity Brookfield RV (spindle C, speed 5):
approx. 125000 mPa.s after 24h
Related products
Emulium® Dermolea MB
Sensitive skin shield
INCI Polyglyceryl-6 Distearate (and) Candelilla/Jojoba/Rice Bran Polyglyceryl-3 Esters China NMPA notified
Emulium® Dermolea MB is a multifunctional plant-based O/W emulsifier particularly adapted to sensitive skin.
Lipocire™ A SG
Sustainable texturizing
INCI C10-18 Triglycerides China NMPA notified
This waxy compound has a melting point close to skin temperature and delicately melts on the skin.
Gatuline® Skin-Repair AF
Damaged skin rescue
INCI Propanediol (and) Water (and) Onopordum Acanthium Flower/Leaf/Stem Extract
Gatuline® Skin-Repair AF boosts the synthesis of specialized pro-resolving mediators and therefore, prevents chronic inflammation induced with age.
Gatuline® RC Bio
Source of youth
INCI Water (and) Fagus Sylvatica Bud Extract China NMPA notified
Gatuline® RC Bio makes the most of the energizing properties of beech tree buds to stimulate cells’ metabolism and increases skin hydration.
Associated content
Gattefossé dévoile Emulium® Dermolea MB, le bouclier des peaux sensibles
Reading : 2mn
Emulium® Dermolea MB, le nouvel émulsionnant H/E d’origine végétale de Gattefossé, sera officiellement lancé lors du salon in-cosmetics global 2023 à Barcelone.
