In a few words
This SPF50 Lotion is the perfect texture for body application without any sticky feel. Due to its low viscosity, this formula is super easy to spread on the skin. As every suncare formulation with chemical UV filters only, the oil phase is quite important in the formula. However, 4% of Emulium® Dermolea MB is sufficient to emulsify this oil phase without co-emulsifier.
Key points
- Fluid texture
- High protection
- No sticky feel
Upon application
Formula
Phase | Name | INCI | Supplier | % |
---|---|---|---|---|
A1 | DEMINERALIZED WATER | WATER | - | 39,72 |
KELCO-CARE™ DIUTAN GUM | SPHINGOMONAS FERMENT EXTRACT | LUBRIZOL | 0,08 | |
A2 | BUTYLENE GLYCOL | BUTYLENE GLYCOL | - | 3,00 |
B1 | EMULIUM® DERMOLEA MB | POLYGLYCERYL-6 DISTEARATE, CANDELILLA/JOJOBA/RICE BRAN POLYGLYCERYL-3 ESTERS |
GATTEFOSSE | 4,00 |
COSMOSURF® CE-140 | STEARYL/OCTADODECYL CITRATE CROSSPOLYMER | SURFATECH | 2,00 | |
B2 | UVINUL® T 150 | ETHYLHEXYL TRIAZONE | BASF | 4,00 |
UVINUL® A PLUS | DIETHYLAMINO HYDROXYBENZOYL HEXYL BENZOATE | BASF | 5,00 | |
TINOSORB® S | BIS-ETHYLHEXYLOXYPHENOL METHOXYPHENYL TRIAZINE | BASF | 3,00 | |
PARSOL® EHS | ETHYLHEXYL SALICYLATE | DSM | 5,00 | |
C12-15 ALKYL BENZOATE | C12-15 ALKYL BENZOATE | - | 5,00 | |
PRESERVATIVE | PRESERVATIVE | - | 0,70 | |
SCHERCEMOL™ DIS ESTER | DIISOPROPYL SEBACATE | LUBRIZOL | 8,00 | |
DPPG CG | PROPYLENE GLYCOL DIPELARGONATE | GATTEFOSSE | 4,00 | |
C | TINOSORB® M | METHYLENE BIS-BENZOTRIAZOLYL TETRAMETHYLBUTYLPHENOL, WATER, DECYL GLUCOSIDE, PROPYLENE GLYCOL, XANTHAN GUM |
BASF | 10,00 |
DEMINERALIZED WATER | WATER | - | 3,00 | |
D | CITRIC ACID (30% SOL.) | WATER, CITRIC ACID | - | 0,10 |
E | PERFUME EUGENIA WHITE CREAM | PARFUM | TECHNICO-FLOR | 0,40 |
F | GATULINE® IN-TENSE MB | CAPRYLIC/CAPRIC TRIGLYCERIDE, ACMELLA OLERACEA EXTRACT | GATTEFOSSE | 1,00 |
SOLASTEMIS™ | FRUCTOSE, WATER, GLYCERIN, SECHIUM EDULE FRUIT EXTRACT | GATTEFOSSE | 2,00 | |
100,00 |
Operating instruction
- Heat demineralized water at 75°C and add Kelco-Care™ diutan gum under stirring then let the gel swell under mixing for 10min.
- Add A2.
- Heat phase B2 at 78°C under stirring until complete solubilization of the UV filters, then let it cool to 70-75°C.
- Then add B1 into B2 and stir until complete solubilization.
- Add B (70°C) to A (70°C) under stirring and homogenize for 10 min at 2000rpm.
- Then cool to 50°C under mixing 1000rpm.
- Add phase C premixed to emulsion under stirring and homogenize for 2min at 2000rpm.
- Cool to 35°C and add one by one under mixing phases D, E, and F.
- Complete cooling to 25°C under mixing.
Specifications
- Aspect: Glossy and slighty yellow lotion
- pH: 5.4 ± 0.3
- Viscosity Brookfield RV (spindle A, speed 5):
approx. 6000 mPa.s after 24h - Photostability 92%
- Conform to Australian, EU, Japan, UK, MERCOSUR, and China regulations
- SPF in vivo (ISO 24 444:2019 5 subjects): 50
- UVA in vitro (ISO 24 443): 23.7
- Critical wavelength : 378nm
Related products
Associated content
Gattefossé unveils Emulium® Dermolea MB, the sensitive skin shield
Emulium® Dermolea MB, Gattefossé’s new plant-based O/W emulsifier, will officially launch at in-cosmetics global 2023 in Barcelona.