Holo Eye Liner ⋅ Gattefossé

In a few words

Reveal the beauty of your eyes with this purple holographic eye liner. The combination of Emulium® Dolcea MB with Lipocire® A SG gives this creamy and smooth texture that slides and melts seamlessly on the eyelid with a long staying power. Emulium® Dolcea MB shows unfailing efficacy with this formula rich in pigments.

Key points

Holographic
Creamy
Longlasting

Upon application

Formula

Phase	Name	INCI	Supplier	%
A	EMULIUM® DOLCEA MB	CETEARYL ALCOHOL, GLYCERYL STEARATE, JOJOBA ESTERS, HELIANTHUS ANNUUS (SUNFLOWER) SEED WAX, SODIUM STEAROYL GLUTAMATE, WATER, POLYGLYCERIN-3	GATTEFOSSÉ	4.5
	CETYL ALCOHOL	CETYL ALCOHOL	-	1.5
	DEFINICIRE®	JOJOBA ESTERS, HELIANTHUS ANNUUS (SUNFLOWER) SEED WAX, POLYGLYCERIN-3	GATTEFOSSÉ	1.0
	LIPOCIRE® A SG	C10-18 TRIGLYCERIDES	GATTEFOSSÉ	5.0
	CETIOL® C5	COCO-CAPRYLATE	BASF	5.0
	PRESERVATIVE	PRESERVATIVE	-	1.0
B	DEMINERALIZED WATER	WATER	-	60.025
	AVICEL® PC 591	MICROCRYSTALLINE CELLULOSE, CELLULOSE GUM	DUPONT	0.6
	VANATURAL	BENTONITE	R.T. VANDERBILT	1.0
	SATIAXANE VPC 911	XANTHAN GUM	CARGILL	0.25
C	XIRONA CARRIBEAN BLUE	MICA, TITANIUM DIOXIDE, SILICA, TIN OXIDE	MERK	6.5
	INTENZA PURPLE REIGN	SYNTHETIC FLUORPHLOGOPITE, TITANIUM DIOXIDE, RED 6 LAKE, BLUE 1 LAKE	SUN CHEMICAL	7.0
	XIRONA KIWI ROSE	SILICA, TITANIUM DIOXIDE, TIN OXIDE	MERCK	6.5
D	SODIUM HYDROXIDE (10 % SOL.)	WATER, SODIUM HYDROXIDE	-	0.125
				100.0

Operating instruction

Weight ingredients of phase A and heat at 75°C.
In a separate beaker, disperse Avicel® PC 591 of phase B into water, previously heated to 75°C, mix under high shear (rotor stator/ ultra turrax) for about 10 min.
Under rapid mixing, add Vanatural of phase B and maintain mixing with high shear for about 10 min.
Then, add xanthan gum of phase B with moderate speed.
Under rapid mixing (Rotor/Stator 3000 rpm), slowly add phase A to phase B until homogenous.
Cool under moderate mixing to 35°C, add phase C and control the color.
Adjust pH with phase D if necessary (pH value 7.3-8.3).